Beside all the advantages offered by the PREMIER window, the new requirements and needs of the buyers require permanent improvements and widening the range of products. The PREMIER PLUS window is characterised with the modern design and straight lines. Its basic characteristic is a special construction by which we enabled building in a third glass sheet, resulting in the improvements in the acoustic and thermal isolation.
Venetian blinds are integrated between the glass sheets as the protection from sun and unwanted looks, and are an excellent solution for those who cannot build in classic blinds, or just prefer their modern looks.
WOOD: The PREMIER PLUS window is produced of three-layer laminated elements made of a high quality wooden material, thickness 89 mm, without a visible finger joint.
Using the laminated limed wood, dried to the humidity content of 12-14% and the adequate varnish, guarantees the construction stability and persistence of the product during the time. Although here too there are no slats for fastening the glass, this window has straight lines in the construction.
The selection of the available wood, depending on the requirements of the climate and aesthetic conditions, contains fir/spruce, oak, larch and meranti.
ALUMINIUM: The outer side of the window is covered with an aluminium profile which is attached to the wood by buckles. The aluminium is used in the soft line version too, and we can choose it according to the colours from the RAL card and harmonize it with the exterior.
GLASS: The standard glass that we use is the isolation glass, consisting of 2 float glasses with thickness of 4 mm placed on both faces and connected at the diameter, with a placed distancer with the standard thickness of 20 mm (4-20-4), in the aluminium colour, and with option for white, brown white, RAL 9010 and the bronze colour.
As the standard we use the low-emission glass (Low-e), with the possibility of filling the gas within the distancer (argon). These glasses have increased thermal isolation, so the thermal transmission value for 4-20-4 Low-e + argon reaches U=1,1 W/m2K.
At a special request by a buyer we can also offer various types of safety glass, ornament glass and glass with built in cross-shaped distancers (duplex) for the window with vertical and horizontal bars on the glass.
HARDWARE: For simple and safe handling with the window we use the hardware made by a world renowned manufacturer that has a long-time experience in making the mechanisms for the single-handed tilt and turn opening of the casement.
All the elements are made of the cast metal made of steel and zinc, inox steel for the angle turnings springs and high quality plastics for various small parts. All the windows have caps as the final cover of visible hardware parts, which can be in the white, brown and titanium colour.
SURFACE TREATMENT: The products we use to varnish our joinery are impregnations and water based varnishes produced by a reputable European manufacturer. The industrial processing and varnishing before assembling the window, hardware and glass elements, enables the quality and total protection of the wood as well as the uniformity and quality of the colour and the final varnish. The transparent varnishes are available in the colours according to the shades card, while the colours for the covering coats can be determined by the RAL card.
GASKETS: The window is equipped with a double Qlon gasket at the window sash, which improves the thermal and acoustic isolation.
PANA PREMIER PLUS
Why PREMIER PLUS?
Improved thermal and acoustic isolation.
Contemporary appearance.
Possibility to harmonize the colours with the interior and exterior.
Long duration.
Easy maintenance.
